HP StorageWorks HSG80 ACS Solution Software V8.8 for Novell NetWare Installation and Configuration Guide (AA-RV1MA-TE, March 2005)

FC Configuration Procedures
130 HSG80 ACS Solution Software V8.8 for Novell NetWare Installation and Configuration Guide
Configuring Devices
The disks on the device bus of the HSG80 can be configured manually or with the
CONFIG utility. The CONFIG utility is easier. Invoke CONFIG with the
following command:
RUN CONFIG
WARNING: HP recommends that you use the CONFIG utility only at reduced
I/O loads.
The CONFIG utility takes about two minutes to discover and to map the
configuration of a completely populated storage system.