HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Release Notes (AA-RV1YA-TE, March 2005)

Documentation Updates
29HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for
Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Release Notes
Documentation Updates
The following documentation changes were made in order to consolidate and
reduce the number of documents associated with V8.8-1 Solution Software:
■ The section "FC Switch Updates" was removed along with the Fibre Channel
Switch Support table. Switch support information is available in the HP SAN
Design Reference Guide at
http://h18006.www1.hp.com/storage/saninfrastructure.html .
■ New document Enterprise and Modular Storage RAID Array Fibre Channel
Arbitrated Loop Configurations Application Note consolidates prior release,
host-specific FC-AL application notes into a single, multivendor document
for FC-AL configurations. This document supersedes the following
application notes:
— Enterprise and Modular Storage RAID Array FC-AL HA Configurations
for Windows NT/Windows 2000 - Intel Application Note, Part Number:
AA-RHOSE-TE
— Enterprise and Modular Storage RAID Array FC-AL Configurations for
Windows NT/Windows 2000 Application Note, Part Number:
AA-RHORC-TE
■ The following documents were incorporated into the HP StorageWorks
HSG80 ACS Solution Software Installation and Configuration Guide:
— Enterprise and Modular Storage RAID Array Fibre Channel Cluster for
Windows NT/Windows 2000 Installation Guide
— Installing the Integration Patch for Compaq Insight Manager and ACS
V8.6 or Later
The following changes were made to the general content of these Release Notes
since they were last published:
■ A new section, “Multiple Storage System Types” on page 9, was added to
address basic configuration rules used in mixing different HP StorageWorks
products in the same SAN.
■ A new section, “ACS Feature Support” on page 41, was added to assist
customers who wish to extend the interoperability of their SAN.
■ The section “Layered Software Applications” on page 36, was updated.
■ The section “Disk Device Support” on page 30, was updated.
■ The section "System Components", page 31, was updated.