HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Release Notes (AA-RV1YA-TE, March 2005)

Solution Software Kit Upgrade Procedures
39HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for
Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Release Notes
These procedures are applicable to only Secure Path V3.1A for Windows (SP 3)
or Secure Path V4.0-1 or higher for Windows. To obtain Secure Path V3.1A for
Windows (SP 3), visit the HP web site at http://www.hp.com
. Follow the
applicable storage-related links to the software download page. To obtain Secure
Path for Windows, contact your HP technical support representative.
Note: For information on updating the Solution Software Kit using transparent failover
procedures, see the
HP StorageWorks HSG80 ACS Solution Software Version 8.8 for
Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Installation and
Configuration Guide
.
New Solution Software Kit V8.8-1 Installation Procedures
To install the Solution Software Kit for the first time, complete the following
steps:
1. Ensure that the Fibre Channel Adapter (FCA) is not connected.
2. Download the Solution Software Kit and click Solution Software for
Windows.
a. Click Perform Multi Driver Update to install the HBA driver.
b. Choose Multipath or Transparent Mode.
c. Click SWCC (optional) to install SWCC components.
Note: Do not restart the server at this time if instructed to do so.
3. Using your Secure Path Software CD, install Secure Path V3.1A for Windows
or Secure Path V4.0-1 or higher for Windows in accordance with the
instructions provided with that product. If you are using Secure Path V3.1A,
apply the Secure Path V3.1A for Windows SP 3 update.
4. Shut down the server.
5. Connect the FCA fibre cables to the switch(es).
6. Restart the server.