HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Release Notes (AA-RV1YA-TE, March 2005)

Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Notes
50 HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for
Windows NT, Windows 2000, and Windows Server 2003 (32-bit) Release Notes
The maximum number of LUNs supported is 128 per storage system. If you are
using Secure Path V3.1A SP1, the maximum number of LUNs is 64 per storage
system. If you are using Secure Path V4.0x, the maximum number of LUNs is 128
per storage system. The LUNs can be contiguous or non-contiguous.
Note: Large LUNs are supported on Windows NT, Windows 2000 Server, and
Windows 2000 Advanced Server.
The chart below indicates cases in which Large LUNs are enabled.
Y = functional
N = not functional
Controller Configuration
It is recommended that you set the SCSI_VERSION to SCSI-3 for maximum
availability.
■ Multi-bus failover mode (with Secure Path V3.1A SP1)—Support for 64
LUNs per storage system (SCSI-2 mode) or 63 LUNs + 1 CCL (SCSI-3).
These LUN numbers must be between 0 and 63.
■ Multi-bus failover mode (with Secure Path V4.0x)—Support for 128 LUNs
per storage system (SCSI-2 mode) or 127 LUNs + 1 CCL (SCSI-3). These
LUN numbers must be between 0 and 199.
■ Transparent failover mode—Support for 128 LUNs per storage system
(SCSI-2 mode) or 127 LUNs + 1 CCL (SCSI-3). These LUN numbers must
be between 0 and 199.
ACS V8.5 ACS V8.6/8.8-1
WNT W2000 WNT
W2000
*WS2003
(32-bit)
SCSI-2 LUN 0 present Y Y Y Y
SCSI-2 LUN 0 not
present
NNNY
SCSI-3 LUN 0 always
present
YYYY