HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Maintenance and Service Guide (EK-G80MS-SA. C01, March 2005)

Upgrading the Subsystem

177HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software

Maintenance and Service Guide

Note: After controller B shuts down, the Reset button and the first three LEDs turn on

(see Figure 74).

Proceed only after the Reset button stops flashing and remains on.

Figure 74: Reset button and first three LEDs

17. Verify that all units failed over to controller A by entering the following

command to show the status of each unit:

HSGA> SHOW UNITS FULL

1 Reset button

2 First three LEDs

123456

5021