HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Maintenance and Service Guide (EK-G80MS-SA. C01, March 2005)

Upgrading the Subsystem
233HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Maintenance and Service Guide
Deleting a software patch
All installed ACS V8.7 (or earlier) patches should be removed after an ACS
V8.8-x installation since they are no longer applicable. Removing older patches
frees up patch memory for future ACS patches.
Use the following steps to delete a software patch:
1. From a host console, quiesce all port activity.
2. Connect a PC or terminal to the controller maintenance port.
3. Start CLCP with the following command:
RUN CLCP
The Code Load & Patch local program Main Menu is displayed (see
Figure 112).
Figure 112: Code Load & Patch local program Main Menu
4. Enter option 2.
The Code Patch Main Menu is displayed (see Figure 113).
Figure 113: Code Patch Main Menu
Select an option from the following list:
Code Load & Patch local program Main Menu
0: Exit
1: Enter Controller Code LOAD utility
2: Enter Controller Code PATCH utility
3: Enter EMU Code LOAD utility
Enter option number (0..3) [0] ?
You have selected the Code Patch local program. This program is used to
manage software code patches. Select an option from the following list:
Type ^Y or ^C (then RETURN) at any time to abort Code Patch.
Code Patch Main Menu
0: Exit
1: Enter a Patch
2: Delete Patches
3: List Patches
Enter option number (0..3) [0] ?