HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Maintenance and Service Guide (EK-G80MS-SA. C01, March 2005)

Common Replacement Information and Procedures
72 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Maintenance and Service Guide
Figure 26 illustrates how to remove and install DIMMs.
Figure 26: DIMM components
Replacing an HSG60 and HSG80 DIMM in single-controller
configurations
Use the steps in “Removing a GLM” and “Installing a GLM” to replace DIMMS
in a cache module.
Caution: Static electricity can easily damage a cache module or a DIMM.
Wear a snug-fitting, grounded electrostatic discharge (ESD) wrist strap.
Removing DIMMs
Use the following steps to remove DIMMs from a cache module in
single-controller configurations:
1. Determine whether the controller is operational:
1 DIMM
2 DIMM slot
3 DIMM retaining clip
5025
1
2
3