HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for OpenVMS Release Notes (AA-RV1QA-TE, March 2005)

Documentation Updates
29HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for
OpenVMS Release Notes
Documentation Updates
■ The section "FC Switch Updates" was removed along with the Fibre Channel
Switch Support table. Switch support information is available in the HP SAN
Design Reference Guide at
http://h18006.www1.hp.com/storage/saninfrastructure.html .
The following changes were made to the general content of these Release Notes
since they were last published:
■ A new section, “Multiple Storage System Types” on page 9, was added to
address basic configuration rules used in mixing different HP StorageWorks
products in the same SAN.
■ The section “Layered Software Applications” on page 33, was updated.
■ The section “Disk Device Support” on page 29, was updated.
■ The section "System Components", page 30, was updated.
Hardware and Software Support
This section lists the hardware, devices, and operating system versions that are
compatible with this Fibre Channel Solution Software Kit.
Array Hardware Support
ACS V8.8-1 is the firmware component of the HP StorageWorks HSG60 and
HSG80 array controllers. When configured in one of these controllers, ACS
supports the following storage arrays: MA8000, EMA12000, EMA16000,
MA6000, RA8000, ESA12000 storage systems.
Additional information regarding hardware specifications can be found at
http://h18006.www1.hp.com/products/storageworks/acs/related.html .
Disk Device Support
To retrieve the latest list of devices supported with HSG60 and HSG80 array
controllers:
1. Go to the following link:
http://h18006.www1.hp.com/products/storageworks/softwaredrivers/acs/
2. Select the manuals (guides, supplements, addendum, etc) link under
self-help resources.