HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for OpenVMS Release Notes (AA-RV1QA-TE, March 2005)

Hardware and Software Support
32 HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for
OpenVMS Release Notes
— When using HSG80 array controllers in conjunction with OpenVMS
V7.3-1:
DEC-AXPVMS-VMS731_FIBRE_SCSI-V0600
— When using HSG80 array controllers in conjunction with OpenVMS
V7.2-2:
DEC-AXPVMS-VMS722_FIBRE_SCSI-V0600
To obtain any of these TIMA kits, go to the following web site:
http://h18000.www1.hp.com/support/files/index.html
■ Some DS20 and DS20e systems manufactured from January through March
2001 may have a component on the MLB that might affect the operation of
some 64-bit PCI HBA options. See OpenVMS Action Blitz #TD3003-A for
details.
StorageWorks Command Console (SWCC)
SWCC V2.5 is included in this release and is used to identify the SWCC suite of
components.
SWCC provides a graphical user interface that can be used to configure and
monitor your storage system. Use of SWCC is highly recommended, but not
required. The SWCC Agent is installed as part of the Solution Software Kit.
For more information on SWCC installation, see the HP StorageWorks HSG80
ACS Solution Software Installation and Configuration Guide. For more
information on SWCC Client operation, see the Command Console Version 2.5
User Guide and the Command Console Version 2.5 Release Notes.
SWCC Scalability
■ The SWCC Client can monitor up to 128 host systems, each with up to 32
storage systems, for a maximum of 4096 concurrent storage connections and a
total of 2.65 PB of storage.
■ One Agent can support up to 32 Clients.