HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Sun Solaris Release Notes (AA-RV1SA-TE, March 2005)

Hardware and Software Support
32 HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Sun
Solaris Release Notes
Required Patches
This release of this Solution Software Kit was qualified with the following Sun
Solaris patches installed:
Note: Do not neglect the required patches listed in Table 7. Your system will not
function properly without them.
SCSI Protocol SCSI-2
SCSI-3
Failover Mode Transparent
Multi-Bus (requires Secure Path software)
Host Mode SUN
Disk Space 150 MB for installation
Adapter
Compatibility
HP StorageWorks 32-bit, 1 Gbps Sbus FC HBA (380575-001),
HBA driver Version 2.6.13, Firmware Version 13.3.7
HP StorageWorks 64-bit, 1 Gbps Sbus FC HBA SWSA4-SC
(123503-001), HBA driver Version 2.6.13, Firmware Version
13.3.7
HP StorageWorks 32-bit, 1 Gbps PCI FC HBA SWSA4-PC
(380576-001), HBA driver Version 2.6.13, Firmware Version 3.0.3
(visual inspection only, not field upgradeable)
HP StorageWorks 64-bit, 1 Gbps cPCI FC HBA 3R-A3512-AA
(254457-B21), HBA driver Version 4.13.01, Firmware Version
2.2.6, F-Code Version 1.18.5, 2.00.05 (FC-SW only) for Solaris 8,
9 only
HP StorageWorks 64-bit, 2 Gbps PCI FC HBA 3R-A3513-AA
(254456-B21), HBA driver Version 4.13.01, Firmware Version
3.2.15, F-Code Version 1.18.5, 2.00.05 (FC-SW only)
HP StorageWorks 64-bit, 1Gbps Sbus FC HBA 3R-A3514-AA
(254458-B21), HBA driver Version 4.13.01, Firmware Version
2.2.6, F-Code Version 1.18.3, 2.00.05 (FC-SW only)
Table 6: Minimum System Requirements (Continued)