HP StorageWorks HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Sun Solaris Release Notes (AA-RV1SA-TE, March 2005)

Upgrading ACS
8 HSG80 Enterprise Modular Storage RAID Array Fibre Channel Solution Software V8.8 for Sun
Solaris Release Notes
Upgrading ACS
To upgrade your ACS firmware to ACS V8.8-1, see the HP StorageWorks HSG60
and HSG80 Array Controller and Array Controller Software Maintenance and
Service Guide. After you upgrade to ACS V8.8-1, you must then complete
specific after-upgrade maintenance checks.
Caution: f you are upgrading to ACS 8.8-1P (HP StorageWorks Data
Replication Manager) with active Remote Copy Sets, note the following
guidelines:
■ Ensure that the latest drivers and that SecurePath V3.0A (Service Pack 1) or
SecurePath V3.0B (Service Pack 1) are installed before upgrading.
■ Complete a shutdown upgrade if you are running Windows NT, Windows
2000, or IBM AIX. Rolling upgrades are not supported on these platforms.
Failure to follow these guidelines can result in undesirable controller upgrade
issues.
Caution: It is critical that you follow upgrade instructions as documented in the
HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller
Software Maintenance and Service Guide
to prevent data loss or corruption. If
at any time you encounter problems during the upgrade, contact your HP
support representative.