HP StorageWorks HSG80 Enterprise/Modular Storage RAID Array Fibre Channel Solution Software V8.7A for Novell NetWare Release Notes

New Features
Release Notes – HSG80 Enterprise/Modular Storage RAID Array Fibre Channel Solution
Software Version 8.7A for Novell NetWare
10
FC Switch Support Updates
The following updates and changes to supported FC Switch products are included in
this Solution Software Version 8.7A release:
• Firmware for all 1 Gbps SAN Switch products was upgraded to v2.6.0h.
• Added support for the following FC switches, many of which provide 2 Gbps
switch support:
— SAN Switch 2/16 (16 Ports FC, 2 Gbps)
— SAN Switch 2/8-EL (8 Ports FC Entry Level, 2 Gbps)
— SAN Switch 2/16-EL (16 Ports FC Entry Level, 2 Gbps)
— SAN Switch 2/32 (32 Ports FC, 2 Gbps)
— SAN Core Switch 2/64 (32-64 Ports FC, 2 Gbps)
— SAN Director 64 (32-64 Ports FC, 1 Gbps)
— SAN Edge Switch 32 (32 Ports FC, 1 Gbps)
— SAN Edge Switch 16 (16 Ports FC, 1 Gbps)
— SAN Director 2/64 (32-64 Ports FC, 2 Gbps)
— SAN Director 2/140 (140 Ports FC, 2 Gbps)
— SAN Edge Switch 2/32 (32 Ports FC, 2 Gbps)
— SAN Edge Switch 2/16 (16 Ports FC, 2 Gbps)
— SAN Edge Switch 2/24 (24 Ports FC, 2 Gbps)
See "Switch Support", page 18, for additional information.
IMPORTANT: StorageWorks recommends that you do not mix switch firmware versions in your
SAN. The best practice is to uniformly upgrade all switches in the SAN.
Solution Software Updates
The following updates were made to your Solution Software:
• Solution Software Version 8.7A was qualified with ACS Version 8.7 and the
components defined in these Release Notes.
• Solution Software Version 8.7A no longer supports StorageWorks 32-bit FC HBA
223180-B21 and StorageWorks 64-bit FC HBA 120186-B21.