HP StorageWorks HSG80 Enterprise/Modular Storage RAID Array Fibre Channel Solution Software V8.7A for Novell NetWare Release Notes

Hardware and Software Support

Release Notes – HSG80 Enterprise/Modular Storage RAID Array Fibre Channel Solution

Software Version 8.7A for Novell NetWare

— EMA12000 S14: One Model 2200 controller enclosure and six single bus

Model 4314 disk enclosures in a 36U Modular Storage Cabinet

— EMA12000 Blue: One Model 2200 controller enclosure and three dual bus

Model 4354 disk enclosures in a 41U Modular Storage Cabinet

— EMA16000 S14: Two Model 2200 controller enclosures and twelve single bus

4314 disk enclosures in a 41U Modular Storage Cabinet

— EMA16000 D14: Four Model 2200 controller enclosures with twelve dual bus

4354 disk enclosures in a 41U Modular Storage Cabinet

NOTE: The predefined models require the following options: Controllers, ECBs, Controller

firmware and drives.

• Configure-to-Order. Allows you to specify the number of controller shelves and

drive shelves desired in a Modular Storage Cabinet.

• Assembly onsite. Allows you to order the components separately and install them

in any supported RETMA rack or cabinet.

Hardware and Software Support

This section lists the hardware, devices, and operating system versions that are

compatible with this Fibre Channel Solution Software Kit.

Array Hardware Support

The following Enterprise/Modular Storage RAID Array hardware products are

supported:

• DS-SW600-AA—600mm wide cabinet 50/60 Hz, dual-redundant controllers,

bolting kit for coupling (two SW600 cabinets)

• DS-SW370-AA—RAID pedestal, five 180-watt power supplies; eight universal

50/60 Hz, 120/240V high-powered blowers; one AC input box; one enhanced

EMU; one pedestal user’s guide; six single-ended I/O modules

• DS-SW370-EA—RAID pedestal; five 180-watt power supplies; eight universal

50/60 Hz, 120/240V high-powered blowers; one AC input box; one enhanced

EMU; one pedestal user’s guide; six single-ended I/O modules; metric mounting

hardware