HP StorageWorks HSG80 Enterprise/Modular Storage RAID Array Fibre Channel Solution Software V8.7A for Novell NetWare Release Notes

Hardware and Software Support
15Release Notes – HSG80 Enterprise/Modular Storage RAID Array Fibre Channel Solution
Software Version 8.7A for Novell NetWare
• DS-BA370-AA—RAID rack mount enclosure; five 180-watt power supplies;
eight universal 50/60 Hz, 120/240V high-powered blowers; one AC input box, six
single-ended I/O modules; one pedestal user’s guide; one enhanced EMU; one
PVA, metric mounting hardware
• DS-BA370-MA—Maintenance option for the SW370 and BA370 field service
option, FRU
• DS-BA35X-HH—180-watt, 100- to 200-V power supply; 240-V, AC
factor-corrected power supply; blue color carrier
• DS-BA35X-MK—High-powered blower for the SW370 and BA370
• DS-BA35X-MP—Termination module
• DS-BA35X-BA—External cache battery shelf for SW370
• DS-BA35X-BC—Single battery in blue SBB
• DS-BA35X-BD—Double battery in blue SBB
• DS-BA35X-EB—Enhanced Environmental Monitor Unit of the SW370 and
BA370
• DS-BA35X-MN—Single-ended, Ultra SCSI I/O module
• DS-BA35X-EC—Power verification and addressing module
• HS35X-BA—Single external cache battery in an SBB
• HS35X-BD—Dual external cache battery in an SBB
• DS-HSDIM-AB—64 MB cache upgrade for HSX80
• DS-HSDIM-AC—256 MB cache upgrade for HSX80
Disk Device Support
This Fibre Channel Solution Software Kit supports the disk devices listed in Table 4 at
the indicated hardware and microcode levels.
NOTE: Full 14-slot drive support per channel is available on MA/EMA Series arrays only.
IMPORTANT: New Universal Disk Drives (or units that are migrated from SmartArray
controllers usage) being configured into storageset members need to be initially written to with
DILX (a diagnostic utility on HSG storage systems). DILX only operates on units. Therefore, the
new disks must be configured into a unit prior to running DILX.