HP StorageWorks HSG80 Enterprise/Modular Storage RAID Array Fibre Channel Solution Software V8.7A for Novell NetWare Release Notes

Hardware and Software Support
19Release Notes – HSG80 Enterprise/Modular Storage RAID Array Fibre Channel Solution
Software Version 8.7A for Novell NetWare
Secure Path Software
Secure Path is a high availability, multi-bus software application that supports FC-AL
and FC-SW connectivity. This Fibre Channel Solution Software Kit supports the
Secure Path software shown in Table 6.
NOTE: For more information on Secure Path software, see the product documentation that
comes with the product, or visit the StorageWorks website:
http://h18006.www1.hp.com/products/sanworks/secure-path/index.html
Layered Software Applications
Compatibility with StorageWorks layered software applications is defined in Table 7.
In cases where ACS functional builds other than Version 8.7F are required, ensure that
all necessary components for those configurations are at the proper level prior to
upgrading your ACS code.
NOTE: DRM is supported on Novell NetWare Version 5.1 and 6.0 only.
Failover Mode Transparent (all supported OS versions)
Multi-Bus (NetWare V5.1 and V6.0 only, requires Secure Path software)
Host Mode NETWARE
Disk Space 5 MB
Adapter
Compatibility
StorageWorks 64-bit, 2Gb PCI-X FC HBA 281540-B21 (3R-A3750-AA)
FCA2210, HBA driver V6.51b, Firmware Version 1.18.4/BIOS 1.34
Table 5: Minimum System Requirements (Continued)
Table 6: Secure Path Compatibility
Operating System Supported Product Version
NetWare V5.1 and V6.0 Version 3.0C
Table 7: Layered Application Compatibility
Application Version
Supported ACS
Variants
Data Replication Manager (DRM) Version 8.7P Version 8.7P
Storage Resource Manager (SRM) Version 4.0B Version 8.7F
Network View Version 2.0B Version 8.7F/G/P
Management Appliance Version 1.0C Version 8.7F/P