HP StorageWorks HSG80 Enterprise/Modular Storage RAID Array Fibre Channel Solution Software V8.7A for Novell NetWare Release Notes

Documentation Anomalies

Release Notes – HSG80 Enterprise/Modular Storage RAID Array Fibre Channel Solution

Software Version 8.7A for Novell NetWare

Mounting a CLONE

Before mounting a CLONE, make sure you move it to another system. Having two

identical NetWare Volume Names on the same system can cause problems. NetWare

does not allow you to mount a SNAPHOT on the same server that hosts the original

volume. NetWare views the SNAPSHOT as a software mirror of the original volume

and does not allow you to mount both copies on the same server. The SNAPSHOT can

only be mounted on another NetWare server.

Cluster Configurations

If using an array in a cluster configuration, leave 5 MB free on one array for cluster

configuration information.

SCSI-2 Configurations

Do not use LUN 0 with Novell NetWare in multi-bus failover mode. Do not use LUN

0 or LUN 100 with Novell NetWare in transparent failover mode.

SCSI-3 Mode

SCSI-3 Mode is now supported under NetWare.

NSS Partitions

NSS partition creation is supported by this Solution Software under NetWare.

Documentation Anomalies

• All references to StorageWorks Command Console (SWCC) in the HSG80 ACS

Solution Software Version 8.7 for Novell Netware Installation and Configuration

Guide are no longer valid. SWCC no longer ships with the HSG80 Modular

Storage RAID Arrays Solution Software V8.7A. Refer to "Controller

Configuration with NetWare", page 23, for replacement options.