HP StorageWorks HSG80 Enterprise/Modular Storage RAID Array Fibre Channel Solution Software V8.7A for Novell NetWare Release Notes

Important Notice Regarding Cache Sizes
Release Notes – HSG80 Enterprise/Modular Storage RAID Array Fibre Channel Solution
Software Version 8.7A for Novell NetWare
6
• HSG80 Modular Storage RAID Arrays Solution Software V8.7A for Novell
NetWare CD-ROM
— Installation and scripting utilities
—Device drivers
The following supporting documentation is available from the StorageWorks website:
http://h18006.www1.hp.com/storage/index.html
• SAN Design Reference Guide, Part Number: AA-RMPNH-TE
• Enterprise/Modular Storage RAID Array Fibre Channel Arbitrated Loop
Configurations Application Note, Part Number: AA-RS1ZA-TE
• Model 2100 and 2200 Ultra SCSI Controller Enclosures User Guide, Part
Number: EK–SE2C8–UA. C01
• Model 4300 Family Ultra3 LVD Disk Enclosures User Guide, Part Number:
EK–LVDU3–UA. A01
• Modular Array Cabinet Restrictions, Part Number EK-MACON-CA. B01
Important Notice Regarding Cache Sizes
For ACS Version 8.7, minimum cache size requirements are 128 MB in unmirrored
configurations, and 256 MB in mirrored configurations, per cache module.
The cache size requirements for running ACS Version 8.7P remain at 512 MB.
Identifying ACS Revision Level
The ACS release package you received should include a PCMCIA program card
containing the new ACS software. Included in this section are instructions for
determining the ACS version running on your RAID Array.
Once ACS is installed, you can identify the specific version of ACS by typing the
following command at the CLI prompt:
HSG80> SHOW THIS_CONTROLLER
The resulting display lists the software revision level as one of the following:
V87G
V87F
V87P