HP StorageWorks HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide (AA-RV1FA-TE, March 2005)

Installing and Configuring HSG Agent
137HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide
■ Notification via TCP/IP socket
■ Notification via SNMP protocol
■ Notification via TCP/IP socket SNMP
10. Select the error notification level. You are notified based on this level. (You
must select one.)
■ Fatal errors
■ Warnings and fatal errors
■ Info warnings and fatal errors
11. Select the subsystem access that the Client has. (This is used to control the
Client access into the subsystem. You must select one.)
■ Overall system status
■ Detailed status
■ Configuration status
12. Start Installation. (Click on the Start Install button located in the lower right
corner of the screen.)
To Add or change the SWCC Agent configuration. Use the Agent configure script
located in the
/opt/steam/bin dir called config.sh.
GUI Console Displays Installation Warning
The GUI installation process uses a standard error trapping screen that is
displayed when part of the required installation information is missing or part of
the installation has failed. Below is a sample of the default screen.