HP StorageWorks HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide (AA-RV1FA-TE, March 2005)

Installing and Configuring HSG Agent
145HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide
The following is displayed:
Note: You can change the configuration of the Agent at any time. For more
information, see "Configuring the Agent for an Alternate Path", page 148.
You can reconfigure previously installed Agents by using the RAID Array
Configuration menu. To access the RAID Array Configuration menu program,
enter the following command:
# /installation_directory/steam/bin/config.sh
Note: When you make a change to the HS-Series Agent configuration, you must stop
and restart the HS-Series Agent for your changes to take effect.
RAID Array Configuration Menu
Agent Admin Options Storage Subsystem
Options
1) Change Agent Password 12) View Subsystems
2) Change SNMP Enterprise OID 13) Add a Subsystem
3) Start/Stop the Agent 14) Remove a
Subsystem
4) Toggle Agent Startup on Boot 15) Modify a
Subsystem
5) Uninstall Agent
Agent Notification Options
Client Options
6) Toggle Error Log Notification 16) View Clients
7) Toggle Mail Notification 17) Add a Client
8) View Mail Notification List 18) Remove a Client
9) Add User to Mail Notification List 19) Modify a Client
10) Remove User from Mail Notification List
11) Modify Mail Notification List
Exit
:
Q)
Enter Selection: