HP StorageWorks HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide (AA-RV1FA-TE, March 2005)

Installing and Configuring HSG Agent
146 HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide
Restarting the Agent
When changes are made to the Agent configuration, it must be restarted for
changes to take effect.
1. Select Start/Stop the Agent from the Agent Maintenance menu.
2. If the Agent is shown to be running in the RAID Array Configuration menu,
select option Y to stop the Agent. Repeat the menu selection and select option
Y to start the Agent.