HP StorageWorks HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide (AA-RV1FA-TE, March 2005)

FC Configuration Procedures
169HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide
Configuring Storage Containers
For a technology refresher on this subject, refer to "Choosing a Container Type",
page 78.
In choosing a container, you choose between independent disks (JBODs) or one of
several storageset types, as shown in Figure 43. The independent disks and the
selected storageset may also be partitioned.
The following configurations are detailed in the following sections:
■ "Configuring a Stripeset", page 170
■ "Configuring a Mirrorset", page 170
■ "Configuring a RAIDset", page 171
■ "Configuring a Striped Mirrorset", page 172
■ "Configuring a Single-Disk Unit (JBOD)", page 173
■ "Configuring a Partition", page 173
Figure 43: Storage container types
Partition
Striped mirrorset
(R0+1)
Stripeset
(R0)
RAIDset
(R3/5)
Mirrorset
(R1)
Single
devices
(JBOD)
Storagesets
Containers