HP StorageWorks HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide (AA-RV1FA-TE, March 2005)

Backing Up, Cloning, and Moving Data
198 HSG80 ACS Solution Software V8.8 for HP-UX Installation and Configuration Guide
To Clone a single-disk unit, stripeset, or mirrorset:
1. Establish a connection to the controller that accesses the unit you want to
Clone.
2. Start Clone using the following command:
RUN CLONE
3. When prompted, enter the unit number of the unit you want to Clone.
4. When prompted, enter a unit number for the Clone unit that Clone creates.
5. When prompted, indicate how you would like the Clone unit to be brought
online: either automatically or only after your approval.
6. When prompted, enter the disk drives you want to use for the Clone units.
7. Back up the Clone unit.