Compaq StorageWorks UltraSCSI RAID Enclosure (DS-BA370 Series) User's Guide (EK-BA370-UG. C02, September 1998)

Assembling an UltraSCSI RAID Subsystem
B–10 UltraSCSI RAID Enclosure
Connecting Subsystem Cables
Cabinet user documentation describes the cable routing, location, and
function. The cables involved might include:
• Controller-to-controller
• Controller-to-host
• ECB-to-cache module
For a detailed description of the cable connection procedures and
cable routing, refer to the following publications:
• Array controller documentation
• DIGITAL StorageWorks UltraSCSI RAID Cabinet Subsystem
(DS–SW600 Series) Installation and User’s Guide
• Pedestal documentation
Configuring the Subsystem
Refer to Chapter 2 for configuring the subsystem. Apply
configuration rules that pertain to the UltraSCSI subsystem being
assembled.
Turn O
N the subsystem using Table 2–2.