HP StorageWorks Command Console V2.5 User Guide (AA-RV1UA-TE, March 2005)
Table Of Contents
- Contents
- About this Guide
- About SWCC
- Using Command Console
- Setting Up Notification
- Required Components for Notification
- Setting Up Pager Notification
- Using SWCC with a Third-Party Storage Management Program
- Using Event Logging on the Client System to Monitor Your Subsystem
- Interpreting Agent Email Messages
- About Event Information Fields
- Mapping State Change Digits to RAID System Components
- Table 11: State Change Digit Position and Corresponding RAID system Component
- The First Digit of the State Change Field (Overall RAID System)
- The Second Digit of the State Change Field (Disks)
- The Third Digit of the State Change Field (Power Supply)
- The Fourth Digit of the State Change Field (Fans)
- The Fifth Digit of the State Change Field (Battery)
- The Sixth Digit of the State Change Field (Temperature)
- The Seventh Digit of the State Change Field (This_Controller)
- The Eighth Digit of the State Change Field (Communications LUN)
- The Ninth Digit of the State Change Field (Other_Controller)
- The 10th Digit of the State Change Field (External Factors)
- The 11th Digit of the State Change Field (Logical Units)
- Using the Storage Window
- Why Use the Storage Window?
- Configuring a Controller
- Creating Virtual Disks
- Deleting Virtual Disks
- Modifying Virtual Disks
- Configuring the Operating System to Recognize Virtual Disk Changes
- Setting Passwords and Security Options (Network Only)
- Managing and Creating Spare Devices
- Using Configuration Files
- Understanding the Icons
- CLI Window
- Integrating SWCC with Insight Manager
- Troubleshooting
- Troubleshooting Connection Problems
- Invalid Network Port Numbers During Installation
- Network Port Assignments for UNIX-Client/Server Systems
- DHCP and WINS
- Connecting Via the Host SCSI Port
- “Access Denied” Message
- Adding New System by Using Internet Protocol Address May Cause Client to Stop Responding
- “No Agent Running” Message When Adding System to the Navigation Tree
- Troubleshooting the Client
- Authorization Error When Adding an Agent System
- Cannot Open Storage Window
- Client Hangs When LUN Is Deleted
- CLI RUN Commands
- Event Notification for Subsystems Connected to a Client System
- Invalid or Missing Fault Displays and Event Logs
- Pager Notification Continues After Exiting the Command Console Client
- Reconfiguration After Controller Replacement
- Some Graphics Do Not Scale Well with Large Fonts
- Starting Client from the Command Prompt
- Warning Message Windows
- Virtual Disk Recovery from a Configuration File
- Troubleshooting the HS-Series Agents
- Cluster Integration for the HS-Series Agents
- Troubleshooting Connection Problems
- Using the Command Console LUN
- Interpreting SNMP Traps
- Glossary
- Index
145Command Console V2.5 User Guide
index
Index
Index
A
Agent
acceptable names 101
network ports 91, 92
port name 96
reserved LUN address 106
security 79
see also HS-Series Agent 25
Asynchronous Event Service (AES) 99
Client 21
disabling 43
event logging 55
starting manually 42
stopping 42
under Windows 2000/Windows NT 4.0 42
audience 10
authorized reseller, HP 16
B
battery 67, 72, 83
C
cache 67, 70, 112
channel 28
Client
Asynchronous Event Service (AES) 21
Fixed and Floating options 110
port name 96
port numbers 91
reserved LUN address 106
starting 100
Storage Window 21
client list 54, 93
cluster integration 102
Command Console
Client 41
description 19
Command Console LUN (CCL) 31, 105
enabling and disabling 107
Command Line Interpreter (CLI) 21, 84, 98
disabling CCL 107
setting failover mode 85
Compaq Insight Manager
see also integration patch 87
components
Command Console Client 21
SWCC 21
configuration file
cautions 81
initial configuration 108
settings 81
connection
errors 93
host system 31
limitations 35
naming 71
options 25
Remote Access Service (RAS) 99
SWCC 25
controller
cautions 69
configuring 68
fault 48
icon 68
operating system compatibility 71