HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
126 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Removes a disk drive from a failedset. The failedset contains disk drives that
were:
■ Removed by the controller from RAIDsets and mirrorsets because they failed.
■ Manually removed using the SET command (for example, SET
mirrorset-name or REMOVE=disk-name).
Enter the DELETE FAILEDSETS command before physically removing failed
members from the storage enclosure for testing, repair, or replacement.
You should consider all disk drives in the failedset to be defective. Repair or
replace disks found in the failedset.
Syntax
DELETE FAILEDSETS disk-name
Parameters
The following parameter supports the DELETE FAILEDSETS command:
disk-name
Identifies the disk you want to delete from the failedset. Remove only one
disk at a time from a failedset.
Switches
There are no switches associated with this command.
Example
To delete DISK20200 from the failedset, enter:
DELETE FAILEDSETS DISK20200
See Also
SET FAILEDSET
SHOW FAILEDSETS
DELETE FAILEDSETS