HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
127HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Deletes a specified remote copy set. Upon completion of this command, the target
unit is no longer a member of the remote copy set.
Note: This command works only in a DRM environment and requires an HSG80
Array Controller with ACS, V8.8-
x P. Like all DRM commands, use of this command is
heavily restricted. Refer to the latest version of the Operations Guide for the HP
StorageWorks Data Replication Manager application for examples of usage.
This command works only on the site acting as initiator. This is the local site except in
a failover situation.
This command is only valid if the error mode of the remote copy set is normal.
The error mode is set by the ERROR_MODE switch of the SET
remote-copy-set-name command.
If the remote copy set is a member of an association set, the association set must
be deleted before the remote copy set is deleted.
Syntax
DELETE remote-copy-set-name
Parameters
The following parameter supports the DELETE command:
remote-copy-set-name
Identifies the name given to the remote copy set that is to be deleted.
Switches
There are no switches associated with this command.
DELETE remote-copy-set-name