HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
147HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
To show the devices with the SAVE_CONFIGURATION switch enabled, enter
the following command. The screen shown in Figure xx on page is displayed.
SHOW DEVICES FULL
Figure 3: Screen display after issuing the SHOW DEVICES FULL command
To initialize disk DISK031000, and destroy its MBR information, enter:
INITIALIZE DISK031000 DESTROY_MBR
See Also
ADD DISKS
ADD MIRRORSETS
ADD RAIDSETS
ADD STRIPESETS
ADD PASSTHROUGH
ADD UNITS
CONFIGURATION RESET
CONFIGURATION RESTORE
CONFIGURATION SAVE
CREATE_PARTITION
MIRROR
REINITIALIZE container-name
Name Type Port Targ Lun Used by
-------------------------------------------------------------------------
DISK10000 disk 1 0 0S2
DEC RZ28M (C) DEC 2004
Switches:
NOTRANSPORTABLE
TRANSFER_RATE_REQUESTED=20MHZ (synchronous 10.00 MHZ negotiated)
LOCAL
Size: 4108970 blocks
Configuration being backed up on this container
DISK30300 disk 3 3 0S2
DEC RZ28M (C) DEC 2004
Switches:
NOTRANSPORTABLE
TRANSFER_RATE_REQUESTED=20MHZ (synchronous 10.00 MHZ negotiated)
LOCAL
Size: 4108970 blocks
Configuration being backed up on this container