HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
150 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Switches
There are no switches associated with this command.
Examples
To cause the device fault LED on device DISK10000 to flash, enter:
LOCATE DISK10000
To cause the device fault LEDs on all of the devices assigned to disk unit number
D102 to flash, enter:
LOCATE D102
To cause the device fault LEDs on all configured disk devices to flash, enter:
LOCATE DISKS
To turn off the device fault LEDs that are flashing on all devices, enter:
LOCATE CANCEL