HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
163HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
SPECIAL_FUNCTION_ONE=NOPARTITION
Directs the controller to reset the partition flag bits on all devices in a
container and establishes the container as a non-partitioned container. This
command can only be used with RAIDset containers.
Caution: Ensure that the container was previously initiated as a
non-partitioned container before using this command. Failure to do so results
in loss of access to any partitioned data.
Note: Issuing the SPECIAL_FUNCTION_ONE=PARTITION or the
SPECIAL_FUNCTION_ONE=NOPARTITION switch in dual-redundant controller
configurations causes the container ownership to move to the controller from which the
REINITIALIZE
container-name command was not issued.
TURNSAVEOFF
Alters metadata in a storageset devices to indicate that the controller is not to
perform save configuration updates to these devices.
Note: After the TURNSAVEOFF switch is disabled, the bit cannot be reset without
initializing the storageset.
Tip: Using the TURNSAVEOFF switch is a definitive method for disabling save
configuration operations to devices that were initialized under older ACS versions.
This switch does not become effective if a storage container is moved or placed under
a controller running ACS versions prior to V8.8.