HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
167HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Flushes all user data from the writeback cache of the specified controller and
restarts the controller.
Syntax
RESTART controller
Parameters
The following parameter supports the RESTART command:
controller
Identifies which controller is to receive the RESTART command. You must
specify THIS_CONTROLLER (the one connected to the CLI maintenance
terminal) or OTHER_CONTROLLER.
Switches
The following switches support the RESTART controller command:
■ IGNORE_ERRORS and NOIGNORE_ERRORS
■ IMMEDIATE_SHUTDOWN and NOIMMEDIATE_SHUTDOWN
These switches are described in the following paragraphs.
IGNORE_ERRORS
NOIGNORE_ERRORS
(default)
Controls the reaction of the controller, based on the status of writeback cache.
Caution: The IGNORE_ERRORS switch can cause the controller to keep
unflushed data in the writeback cache until it restarts and is able to write the
data to devices. Do not perform any hardware changes until the controller
flushes the cache.
RESTART controller