HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions

169HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software

Command Line Interface Reference Guide

Causes the controller to attempt to write previously unwriteable data from the

writeback cache to the specified devices. No data is lost if the retry fails.

If a container fails in a way that prevents the data in writeback cache to be written

to the container, an unwriteable data error is reported.

Syntax

RETRY_ERRORS unit-number UNWRITEABLE_DATA

Parameter

The following parameter supports the RETRY_ERRORS command:

unit-number

Identifies the unit number to which the data contained in writeback cache tries

to write. The unit number is the same name given to the unit after it was

created using the ADD UNITS command.

Switches

There are no switches associated with this command.

Example

To retry the writing of the cached data previously marked unwriteable to

disk unit D103, enter:

RETRY_ERRORS D103 UNWRITEABLE_DATA