HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
178 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
This switch cannot be changed if a log unit is assigned to the association set.
The log unit must be removed, then the order switch changed, then the log
unit must be reassigned. The order switch goes into effect if the log unit is
assigned.
REMOVE
Removes an existing association set.
Examples
To add remote copy sets RCS2 and RCS4 to association set AS3, enter:
SET AS3 ADD=RCS2
SET AS3 ADD=RCS4
See Also
ADD ASSOCIATIONS
ADD REMOTE_COPY_SETS
SET remote-copy-set-name