HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
181HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Changes the operating characteristics of a host connection. Each path between a
Fibre Channel adapter in a host computer and an active host port on a controller is
a connection.
This command adds the specified host connection to the table of known
connections. This table is maintained in the controller’s memory. The maximum
table length is 96 connections; if the table contains 96 entries, new connections
cannot be added unless some old ones are deleted.
The SET connection-name command changes the operating parameters of
the specified host connection. A host connection is a specific instance of one host
connected to one port of one controller through one host adapter.
Syntax
SET connection-name
Parameters
The following parameter is associated with this SET command:
connection-name
Identifies the name of the host connection. If a new
host-adapter-port-controller connection is made, the new connection is given
a default connection name. The default connection name is !NEWCONnn,
where nn is a decimal number. The connection name can be changed through
the RENAME command.
Switches
The following switches support the SET connection-name command:
■ OPERATING_SYSTEM
■ RESERVATION_STYLE
■ UNIT_OFFSET
These switches are described in the following paragraphs.
SET connection-name