HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
185HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
CONNECTIONS_LOCKED
CONNECTIONS_UNLOCKED
None
DEFAULT_ACCESS=DISABLE_ALL
DEFAULT_ACCESS=ENABLE_ALL
Disable
Enable
INDENTIFIER=n
NOIDENTIFIER
1-9,999
MIRRORED_CACHE
NOMIRRORED_CACHE
None
NODE_ID nnn-nnnn-nnnn-nnnn xx
PORT_1_AL_PA=n
PORT_2_AL_PA=n
0-EF (hexidecimal); factory defaults:
port 1 is 71 and port 2 is 72
PORT_1_TOPOLOGY=FABRIC
PORT_2_TOPOLOGY=FABRIC
None
PORT_1_TOPOLOGY=LOOP_HARD
PORT_1_TOPOLOGY=LOOP_SOFT
PORT_1_TOPOLOGY=OFFLINE
PORT_2_TOPOLOGY=LOOP_HARD
PORT_2_TOPOLOGY=LOOP_SOFT
PORT_2_TOPOLOGY=OFFLINE
None
PROMPT=”new prompt” 1-16 characters
REMOTE_COPY=node-name
NOREMOTE_COPY
None
SCSI_FAIRNESS Disable
Enable
SCSI_VERSION=SCSI-2
SCSI_VERSION=SCSI-3
None
SMART_ERROR_EJECT Disable
Enable
TERMINAL_PARITY
NOTERMINAL_PARITY
Odd or even, no terminal parity
(default)
Table 6: SET controller Switches (Continued)
Switch Value