HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions

188 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software

Command Line Interface Reference Guide

Controls whether newly added units can automatically allow connections

between a Fibre Channel adapter in a host computer and an active host port on

a controller.

Note: The default controller behavior of enabling all connections is retained after ACS

V8.8-

is installed to maintain compatibility with user scripts.

With this command, both controllers have the same setting and the setting

does not change after a controller reboot.

Note: Although the HP StorageWorks HSG Element Manager and HP StorageWorks

Command Console disable all connections for units created through their respective

programs, creating new units through the CLI requires you to manually disable

connections unless you set the default access setting to

DISABLE_ALL.

IDENTIFIER=n

NOIDENTIFIER

Determines how the command console LUN (CCL) is identified by the host

operating system.

■ Specify IDENTIFIER to provide an alternative way (other than a World

Wide Name) for some operating systems to identify the command console

LUN (CCL).

■ Specify IDENTIFIER with the SCSI_VERSION switch if the SCSI

version is set to SCSI-3 mode. The IDENTIFIER switch creates a CCL

identifier that makes the controller and the CCL visible to the host. This

number can be a value between 1–9,999.

Tip: OpenVMS configures DGA units based on the identifier value that is presented

from the controller. You cannot present multiple units from the controller with the same

identifier to a single OpenVMS node or single OpenVMS cluster; otherwise,

unpredicable mounting results occur.