HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)
CLI Command Descriptions
203HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Enables changes to the transfer rate and transportable characteristics of the
specified disk drive.
Syntax
SET device-name
Parameter
The following parameter is associated with this SET command:
device-name
Specifies the name of the device to change, such as disk or passthrough
device.
Switches
The following switches support the SET device-name command:
■ TRANSFER_RATE_REQUESTED
■ TRANSPORTABLE and NOTRANSPORTABLE
These switches are described in the following paragraphs.
■ TRANSFER_RATE_REQUESTED=ASYNCHRONOUS
■ TRANSFER_RATE_REQUESTED=DEFAULT
■ TRANSFER_RATE_REQUESTED=20MHZ (default and maximum setting
for HP StorageWorks MA series cabinets)
■ TRANSFER_RATE_REQUESTED=10MHZ (default and maximum setting
for HP StorageWorks RA8000 series cabinets)
■ TRANSFER_RATE_REQUESTED=5MHZ
Specifies the maximum data transfer rate for the controller to use in
communicating with the device.
SET
device-name