HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions

207HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software

Command Line Interface Reference Guide

Note: The following commands must be issued through the maintenance port of the

HSG60 or HSG80 array controller. Otherwise, all subsequent commands are

rejected.

SET DISABLE_MANAGERS=ALL

SET ENABLE_MANAGERS=host1

An alternative way to perform the same functionality, without the restriction of

using the maintenance port is by entering:

SET DISABLE_MANAGERS=host2,host3,host4,host5...