HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
215HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Caution: Be sure you know which controller has the good configuration
information before entering this command. The device configuration
information from the controller specified by the controller parameter
overwrites the information on the companion controller.
■ Specify THIS_CONTROLLER to copy the device configuration
information from “this controller” to “other controller.”
■ Specify OTHER_CONTROLLER to copy the device configuration
information from the “other controller” to “this controller.”
Due to the amount of information being passed from one controller to the
other, this command can take up to two minutes to complete.
Example
To set the controllers in Transparent Failover mode and copy the configuration
information from “this controller” to “other controller,” enter:
SET FAILOVER COPY=THIS_CONTROLLER
See Also
SET MULTIBUS_FAILOVER
SET NOFAILOVER
SET NOMULTIBUS_FAILOVER