HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
216 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Changes the characteristics of a mirrorset including the addition and removal of
members.
Syntax
SET mirrorset-name
Parameter
The following parameter is associated with the SET command:
mirrorset-name
Specifies the name of the mirrorset to modify. This is the same name given to
the mirrorset at the time it was created with the ADD MIRRORSETS
command.
Switches
The following switches support the SET mirrorset-name command:
■ COPY
■ MEMBERSHIP
■ POLICY and NOPOLICY
■ READ_SOURCE
■ REMOVE
■ REPLACE
These switches are described in the following paragraphs.
COPY=FAST
COPY=NORMAL
(default)
Sets the speed at which the controller copies data to a new member from
normal mirrorset members, if data is being mirrored to the storageset disk
drives.
SET mirrorset-name