HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions

220 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software

Command Line Interface Reference Guide

To remove member DISK30000 from mirrorset MIRR1 created above, enter:

SET MIRR1 REMOVE=DISK30000

Note: If the mirrorset has a replacement policy and an acceptable disk drive is in the

spareset, the controller automatically adds the spare disk drive to the mirrorset.

To add disk DISK30200 to the mirrorset MIRR1 and immediately begin the copy

operation onto DISK 30200, enter:

SET MIRR1 REPLACE=DISK30200