HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
231HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Changes the characteristics of a remote copy set.
Note: This command works only in a DRM environment and requires an HSG80
controller with ACS V8.8-
x P. Like all DRM commands, use of this command is heavily
restricted. Refer to the latest version of the Operations Guide for the HP StorageWorks
Data Replication Manager application for examples of usage.
This command works only on the site that is functioning as initiator.
Syntax
SET remote-copy-set-name
Parameters
The following parameter is associated with the SET command:
remote-copy-set-name
Specifies the name of the remote copy set to modify. This is the name used
with the ADD REMOTE_COPY_SETS command to identify the remote copy
set as a host-addressable unit.
Switches
The following switches support the SET remote-copy-set-name
command:
■ ADD
■ ERROR_MODE
■ INITIATOR
■ OPERATION_MODE
■ OUTSTANDING_IOS
■ REMOVE
SET remote-copy-set-name