HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
239HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
IDENTIFIER=n
NOIDENTIFIER (default)
Determines whether a unique identifier is to be assigned to a unit; thus,
making it visible to the host.
■ Specify IDENTIFIER=n to create a unique unit identifier that makes the
unit visible to the host. This number can be a value from 0 to 32767.
Note: An identifier is required for OpenVMS operating systems to identify the unit.
■ Specify NOIDENTIFIER to disallow the creation of a unique unit
identifier.
MAX_READ_CACHED_TRANSFER_SIZE=n
MAX_READ_CACHED_TRANSFER_SIZE=32 (default)
Sets the largest number of read blocks to be cached by the controller. The
controller does not cache any transfers over the size set. Acceptable values are
from 0 to 2048.
The MAXIMUM_CACHED_TRANSFER switch affects both read and writeback
cache if set on a controller that has read and writeback caching.
MAX_WRITE_CACHED_TRANSFER_SIZE=n
MAX_WRITE_CACHED_TRANSFE_SIZE=32 (default)
Sets the largest number of write blocks to be cached by the controller. The
controller does not cache any transfers over the size set. Acceptable write
block sizes are 0 through 2048.
The MAXIMUM_CACHED_TRANSFER_SIZE switch affects both read and
writeback cache if set on a controller that has read and writeback caching.
MAXIMUM_CACHED_TRANSFER_SIZE=n
MAXIMUM_CACHED_TRANSFER_SIZE=32
(default)
Sets the largest number of read and write blocks to be cached by the
controller. The controller does not cache any transfers over the set size.
Acceptable read and write block sizes are 0 through 2048. The
MAXIMUM_CACHED_TRANSFER_SIZE switch affects both read and
writeback cache if set on a controller that has read and writeback caching. The