HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)
CLI Command Descriptions
265HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Provides a full output of relevant controller information and its operation
configuration. This command and its output display benefits your HP service
providers because its report provides a complete listing of controller configuration
information that is elevated and transferred to support organizations. It is best to
capture this information as soon as a storage anomaly is observed. This command
combines to following commands to provide a complete subsystem report:
■ SHOW controller (THIS CONTROLLER with the FULL switch)
■ SHOW controller (OTHER CONTROLLER with the FULL switch)
■ SHOW REMOTE_COPY_SETS (with the FULL switch)
■ SHOW ASSOCIATIONS (with the FULL switch)
■ SHOW CONNECTIONS (with the FULL switch)
■ SHOW MANAGERS
■ SHOW DEVICES (with the FULL switch)
■ SHOW STORAGESETS (with the FULL switch)
■ SHOW unit-number (with the FULL switch)
SHOW ELEVATION_INFO