HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Descriptions
289HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Displays information about all RAIDsets and RAIDset containers known to the
subsystem.
Syntax
SHOW RAIDSETS
Parameters
There are no parameters associated with this command.
Switches
The following switches support the SHOW RAIDSETS command:
■ FULL
■ SPECIAL_FUNCTION_ONE
These switches are described in the following paragraphs.
FULL
Provides additional details regarding subsystem RAIDsets.
SPECIAL_FUNCTION_ONE
Displays a listing of all RAIDset containers and either one of three possible
container statuses: Good, Maintenance Recommended, or REPORTED
ON THE OTHER CONTROLLER.
Note: Refer to information regarding after upgrade maintenance checks in the HP
StorageWorks Array Controller and Array Controller Software Maintenance and
Service Guide
.
SHOW RAIDSETS