HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)
CLI Command Descriptions
297HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Specifies the name of a particular storageset to be displayed. For example, SHOW
STRIPE1 displays information about the stripeset named STRIPE1.
Specifies the type of storageset to be displayed. Valid types include:
■ CONCATSETS—Shows all concatsets configured to the controller.
■ FAILEDSETS—Shows the failedset configured to the controller.
■ MIRRORSETS—Shows all mirrorsets configured to the controller.
■ RAIDSETS—Shows all RAIDsets configured to the controller.
■ SPARESETS—Shows the sparesets configured to the controller.
■ STORAGESETS—Shows all storagesets configured with the controller.
■ STRIPESETS—Shows all stripesets configured to the controller.
Syntax
SHOW STORAGESETS
Parameters
There are no parameters associated with this command.
Switches
The following switch supports the SHOW STORAGESETS command:
FULL
Provides additional details regarding subsystem storagesets.
SHOW STORAGESETS