HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

About this Guide
30 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Overview
This section covers the following topics:
■ Intended audience
■ Prerequisites
■ Related documentation
Intended audience
This book is intended for administrators who are experienced with the following:
■ HP StorageWorks HSG60 and HSG80 Array Controllers
■ HP StorageWorks Array Controller Software (ACS), V8.7x-x
■ HP StorageWorks BA370 enclosure and enclosure components, such as cache
modules, external cache batteries, and so forth
■ HP StorageWorks M2100 or M2200 enclosure and enclosure components,
such as cache modules, external cache batteries, and so forth
Prerequisites
Before you complete procedures in this document, observe the items below:
■ Thoroughly review and observe the requirements and precautions described in
the “CLI Command Introduction” chapter that starts on page 39.
■ Know what version and variant of ACS is currently in use.
■ Know which enclosure model is currently in use.
■ Know whether the subsystem controllers are in a single or dual-redundant
configuration.
■ Familiarize yourself with the subsystem configuration details.
■ Know the model and types of components installed in your HP StorageWorks
BA370, M2100, or M2200 enclosure.