HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Introduction
41HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
■ CONFIGURATION RESET
■ CONFIGURATION RESTORE
■ CONFIGURATION SAVE
■ EXIT
■ HELP
■ POWEROFF
■ RESTART controller
■ RUN
■ SELFTEST
■ SET controller
■ SET DISABLE_MANAGERS
■ SET ENABLE_MANAGERS
■ SHOW controller
■ SHOW ID
■ SHOW MANAGERS
■ SHUTDOWN controller
■ WWID_ASSIGN storageset LUN_WWID=
The CLI commands controlling the Failover mode of a controller pair are:
■ SET FAILOVER COPY=controller
■ SET MULTIBUS_FAILOVER
■ SET NOFAILOVER
■ SET NOMULTIBUS_FAILOVER
Device commands
Device commands create and configure containers made from physical devices
attached to the controller. Device commands consist of general and spareset, or
failedset commands. The CLI commands that allow you to add and configure
physical devices in general are:
■ ADD DISKS
■ ADD PASSTHROUGH
■ CLEAR_ERRORS device-name UNKNOWN