HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Introduction
42 HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
■ INITIALIZE
■ LOCATE
■ RENAME
■ SET device-name
■ SET EMU
■ SHOW DEVICES
■ SHOW DISKS
■ SHOW disk-name
■ SHOW EMU
■ SHOW PASSTHROUGH
The CLI commands that support sparesets and failedsets include:
■ ADD SPARESETS
■ DELETE FAILEDSETS
■ DELETE SPARESETS
■ SET FAILEDSET
■ SHOW FAILEDSETS
■ SHOW SPARESETS
Selective storage presentation commands
Selective storage presentation commands enable or disable access to individually
selected units from host and controller ports. Paths can be enabled or disabled,
either all inclusively or specifically on a per-path basis during the addition of new
units or as a modification of existing units.
Tip: Refer to the HP StorageWorks HSG Element Manager User Guide for additional
details on selective management options.
The CLI commands that pertain to the selective storage presentation feature
include:
■ ADD CONNECTIONS
■ ADD UNITS