HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Introduction
43HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
■ CLEAR_ERRORS unit-number LOST_DATA
■ CLEAR_ERRORS unit-number UNWRITEABLE_DATA
■ DELETE connection-name
■ DELETE unit-number
■ RETRY_ERRORS unit-number UNWRITEABLE_DATA
■ SET connection-name
■ SET unit-number
■ SHOW connection-name
■ SHOW CONNECTIONS
■ SHOW unit-number
Storageset commands
Storageset commands create and configure complex containers made from groups
of device containers. These commands group device containers together and
allow them to be handled as single units. There are four types of storagesets:
■ Stripesets
■ RAIDsets
■ Striped Mirrorsets
■ Mirrorsets
The CLI commands that pertain to storagesets include:
■ ADD MIRRORSETS
■ ADD RAIDSETS
■ ADD STRIPESETS
■ DELETE container-name
■ INITIALIZE
■ LOCATE
■ MIRROR
■ REDUCE
■ REINITIALIZE container-name
■ RENAME
■ SET mirrorset-name