HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software Command Line Interface Reference Guide (EK-G80CL-RA. C01, March 2005)

CLI Command Introduction
49HP StorageWorks HSG60 and HSG80 Array Controller and Array Controller Software
Command Line Interface Reference Guide
Changing the CLI prompt
Change the CLI prompt display by using the SET controller PROMPT
command. Enter a 1- to 16-character string as the new prompt. For example, the
prompt could be changed as follows:
HSG80_TOP> To indicate the controller type and which controller
(top or bottom)
PROD_HSG_TOP> To indicate the controller use (production), and which
controller (top or bottom)
HSG34_TOP> To indicate the which one of many HSG controllers and
which controller (top or bottom)